As in the smartphone implement protection according to the IP68 standard on the model Aermoo M1
All fans of active rest will come in handy smartphone. Not only large companies such as Samsung, shockproof promote their phones. On the market there are professional brands from China, has released its handset with IP68 protection and attractive appearance.
Today we have pictures of the new durable phone Aermoo M1 with IP68 protection. This is the real IP68 and how they did it? Try to look at the photo below.
Overview appearance on Aermoo M1
The most attractive part Aermoo M1 is a metal back cover, gold and bright. The design is not sleek, decorative lines and screws. Black plastic is used to cover the upper and lower parts. A rear part permanently attached with screws, which prevents it shredded to pieces, even when you actively exploit the device.
As seen in the photo, the camera, a thumbprint scanner, NFC sensor and speaker are lined up vertically on the back cover.
Unscrewing the screws, you can remove one part of the cover to see the slot under the SIM card and the microSD card slot.
According to the previously published portal Smartphone.ua information Aermoo M1 will be equipped with 8-core Snapdragon processor with 6 GB of RAM and internal storage of 64 GB or more advanced bundle with 8 GB of RAM and 128 GB ROM. Camera just get permission 21.0 megapixels. Battery capacity – 5580 mAh.
The Autopsy Aermoo M1
To find out what measures are being taken to achieve IP68 protection, it is necessary to disassemble.
In order to open the phone, you will need two screwdrivers. After the screws are removed, the phone can be divided into two parts. All the holes in the back cover are protected from the ingress of water. Thus, the smartphone can be dipped in water for up to 30 minutes.
In addition to water resistance, the phone glued tightly inside a waterproof and dust-resistant rubber band that prevents the ingress of dust.
In addition a piece of the foam pads put on the rear cover, directly over the battery and an NFC sensor. It is used as a shock absorber and protects internal components when dropped.
On both sides, use a metal lining in order to maintain a unified appearance. They are bolted to the body of the phone. Plastic cushions attached to a metal button to secure the best press.
The headphone Jack and USB connector at Aermoo M1 closed dustproof plug. The stub attached to the body of the phone.
In the end I must say that shown on the picture tube is not the final version Aermoo M1. The manufacturer will continue to conduct tests and reviews of this smartphone is protected by standard IP68. Smartphone.ua plans to continue to follow the tube that the sale will be in July 2017.