SMARTtech: Repeater cellular – versed on the example set 2Gboost and 3Gboost
The leadership of our country is already thinking about when to introduce 5G network and how to earn some money. The editors of the portal Smartphone.ua for a 5G, but believes that even with 4G not all problems are solved. It is very a lot of locations are not even covered by 3G, and the roads between the fields or in the villages uncertainly caught 2G.
If you are lucky enough to live in this place, without the amplifier signal will be bored, lonely and not at all informative. Although there are pluses – rest from information overload in this fast-changing world. Well, if you need? Then to fix the situation can set 2Gboost or 3Gboost.
- 2Gboost (DS-900-kit) amplifier of mobile communication, whose main task is to force your mobile to increase the number antennok on an icon that is visible in the upper right corner of your smartphone. Device still what mobile operator you use, the main thing that it was a standard 2G GSM 900 / 3G UMTS 900. The claimed gain is 65 dB. The repeater automatically detects the force with which it is necessary to strengthen the signal from the tower of the mobile operator and does not load the base station with too much information. Because the data are not only to you but also from you, even if the gadget is used only for downloading content. Built-in hardware and is very economical in terms of energy consumption. The costs are not more than 3 W/h, power is supplied from the charger at 5V/1.2 A. the User needs to remember that the body 2Gboost can not use it outside the premises. Protection standard IP43 water-resistance only. Module housing receiving and covering a small amount of, together their weight doesn’t exceed 500 g. One such repeater covered area up to 300 square meters.
- 3Gboost (DS-2100-kit) is a more powerful and expensive signal booster cellular. Its capacity is sufficient for rooms up to 500 sq m, as the gain is increased to 75 dB. A significant difference in the supported frequencies. This model is focused on the reception and transmission solely in the 3G band UMTS 2100. The design assumes a built-in inside antenna module cover. Installation and setup do not require additional knowledge and skill. Everything can be set independently using the manual provided in the package. The weight of the buildings – up to 600 g, food comes from memory at 24V/0,5 A. If necessary, it is possible to buy the antenna kit.